Low Subsonic Aerodynamic CFD Validation using Simcenter STAR CCM+ Webinar

Low Subsonic Aerodynamic CFD Validation using Simcenter STAR CCM+ Webinar

An insightful webinar featuring SDA Software's CFD Application Engineer, Matt Chan, and Director of Engineering, Ted Blowe, as they present "Low Subsonic Aerodynamic CFD Validation using Simcenter STAR-CCM+".

In this webinar, we will explore how adopting CFD early in the product development process can accelerate time-to-market and reduce project costs. This will be demonstrated by examining the aerodynamic design process using the NASA Cessna 210 as a validation case study. Traditional conceptual numerical tools (XFOIL and AVL) and CFD results will be benchmarked against experimental measurements of a complex airfoil and the Cessna 210.




    • Related Articles

    • Introduction to Simcenter STAR-CCM+ Webinar

      What's in this webinar? SDA Software Director of Engineering Ted Blowe presents this webinar on Introduction to Simcenter STAR-CCM+. The following topics will be discussed: Understanding Simcenter STAR-CCM+: Simcenter STAR-CCM+ serves as a versatile ...

    • What's New in STAR-CCM+ v2302?

      What's in this webinar? SDA Software Engineer Ted Blowe presents this webinar on What's New In STAR-CCM+ v2302. During this webinar you will learn about some of the exciting new enhancements in the latest version of STAR-CCM+, including the following ...

    • How do I download Simcenter STAR-CCM+?

      Please follow these step-by-step instructions to download Simcenter STAR-CCM+: Login to the Siemens Support Center. Create an account if necessary. Select Simcenter STAR-CCM+ Click Downloads. Select the version you wish to download. It is highly ...

    • Simcenter STAR-CCM+ Custom Installation using Siemens License Server

      Follow these step-by-step instructions to download Simcenter STAR-CCM+ with the new Siemens License Server: Install and setup Siemens License Server (saltd vendor daemon). Download the latest version of STAR-CCM+. Launch the installer. Review and ...

    • Simulating Unsteady Valve Motion Using Overset Mesh in STAR-CCM+

      Introduction To simulate the motion of an unsteady valve in STAR-CCM+, the overset mesh plus DFBI (Dynamic Fluid Body Interaction) technique can be employed. This article provides a concise guide on setting up an overset mesh simulation, focusing on ...