Introduction to Femap w/ Nastran Design Optimization SOL 200

Introduction to Femap w/ Nastran Design Optimization SOL 200

What is in this webinar?

This webinar will cover the following topics:
  1. Thickness optimization of a stiffened rectangular plate
    1. Optimization model setup in Femap
    2. Post-process optimization results
    3. Quick comparison to HyperSizer results
  2. Thickness optimization of wing with buckling constraints
    1. How to add buckling constraints
    2. Adjusting the optimizer's parameters to improve convergence
      

    • Related Articles

    • Simcenter Femap w/ Nastran Multi-step Non-Linear Webinar

      What is in this webinar? Siemens Principle Applications Engineer Chip Fricke will be presenting this webinar on Simcenter Nastran Solutions 401 & 402. Some of the topics covered will be: Overview of Simcenter Nastran Multi-step Nonlinear Solutions ...

    • Introduction to Aeroelasticity in Femap w/ Nastran

      What is in this webinar? This webinar will cover the following topics: Aeroelasticity overview Static aeroelastic example Aeroelastic tailoring Flutter example NASTRAN Details and Licensing Advanced Support Services

    • Introduction to Advanced Nonlinear in Femap w/ Nastran

      What is in this webinar? This webinar will demonstrate the use of advanced nonlinear and how to set up a few typical scenarios. NASTRAN Details and Licensing Advanced Support Services

    • Dynamic Response in Femap w/ NX Nastran

      What is in this webinar? This webinar will cover the following topics: FEMAP Dynamics Add-on Overview Frequency Response Demo Random Response Demo NASTRAN Details and Licensing Advanced Support Services

    • Inertia Relief in Femap w/ NX NASTRAN

      Inertia Relief balances out the applied loads with equal and opposite accelerations, creating a state of static equilibrium and eliminating the need for constraints. Nick covers the topic of Inertial Relief in Femap w/ NX Nastran, including: What is ...