In this webinar, we go behind the scenes on our work for the A3 Vahana project. We discuss how FEA can compliment and reduce time in the design process.
Some ways FEA was used to reduce time:
Modal analysis. Femap's mass element allowed us to adapt quickly to changes in the propulsion system.
Load Spreading
Data Output and APIs: Nick discusses how he coded an API to reduce a task that could take a week to 45 minutes. He learned to code the API within a day with no prior information.
What is in this webinar? Static Aeroelastic Trim Analysis The first topic to be covered will be how to set up an aeroelastic trim analysis on an entire aircraft, and how to interpret the results. This will include how to setup a control surface, ...
What is in this webinar? Siemens CAE Solutions Consultant Jay Medeiros will be presenting this webinar on Dynamic Design Analysis Method (DDAM). In this webinar, Jay will cover the following topics: DDAM model setup requirements Simcenter NASTRAN ...
What is in this webinar? This webinar will cover the following topics: Thickness optimization of a stiffened rectangular plate Optimization model setup in Femap Post-process optimization results Quick comparison to HyperSizer results Thickness ...
What is in this webinar? In this webinar, Alex Skavdahl will explore post-buckled behavior by running a model far in excess of when it buckles. The advanced non-linear solver can track the post-buckled behavior well into the plastic range. It’s ...
What is in this webinar? Siemens Principle Applications Engineer Chip Fricke will be presenting this webinar on Simcenter Nastran Solutions 401 & 402. Some of the topics covered will be: Overview of Simcenter Nastran Multi-step Nonlinear Solutions ...