Siemens CAE Solutions Consultant Jay Medeiros will be presenting this webinar on Dynamic Design Analysis Method (DDAM). In this webinar, Jay will cover the following topics:
DDAM model setup requirements
Simcenter NASTRAN DDAM enhancements
Integrated three phase analysis workflow with:
NRL 1396 coefficients
User defined coefficients
Phase 1/2/3 manual workflow for "secure room" classified loads
What is in this webinar? In this webinar, we go behind the scenes on our work for the A3 Vahana project. We discuss how FEA can compliment and reduce time in the design process. Some ways FEA was used to reduce time: Modal analysis. Femap's mass ...
What is in this webinar? Static Aeroelastic Trim Analysis The first topic to be covered will be how to set up an aeroelastic trim analysis on an entire aircraft, and how to interpret the results. This will include how to setup a control surface, ...
What is in this webinar? This webinar will cover the following topics: FEMAP Dynamics Add-on Overview Frequency Response Demo Random Response Demo NASTRAN Details and Licensing Advanced Support Services
What is in this webinar? This webinar will cover the following topics: Thickness optimization of a stiffened rectangular plate Optimization model setup in Femap Post-process optimization results Quick comparison to HyperSizer results Thickness ...
What is in this webinar? This webinar shows a live demonstration of applying loads and constraints to a meshed finite element model (FEM) in Femap, and running a Normal Modes and Static Analyses in the NX Nastran solver. NASTRAN Details and Licensing ...