Popular Articles
Meshing Toolbox in FEMAP
Quickly and interactively edit geometry and create quality mesh using the Femap Meshing Toolbox The Meshing Toolbox is a centralized collection of FEMAP's geometry clean-up and meshing functionalities in a single pane. Below you will find an overview ...
Getting Started with Femap
Welcome to the Getting Started with Femap tutorial series In this tutorial, we'll use Femap to go through the steps of creating and setting up a finite element model, analyzing it with NX Nastran, and reviewing the results. Why did we create this ...
Flutter Analysis Walkthrough
FEMAP Flutter Analysis Example This example will demonstrate how to create the "Aerodynamic model" and specify some analysis parameters used to perform a flutter analysis using NX Nastran. Topics discussed will be: Create an "Aero Panel" (CAERO1 and ...
STAR-CCM+ FMU Co-Simulation with Simcenter Amesim fmi2Fatal
A customer attempted the tutorial, "FMU Co-Simulation with Simcenter Amesim: Check Valve" from the STAR-CCM+ User Guide and received this error messaged: Function fmi2ExitInitializationMode returned status 'fmi2Fatal'. Note, this was performed using ...
Inertia Relief in Femap w/ NX NASTRAN
Inertia Relief balances out the applied loads with equal and opposite accelerations, creating a state of static equilibrium and eliminating the need for constraints. Nick covers the topic of Inertial Relief in Femap w/ NX Nastran, including: What is ...